NEWS
Home > NEWS
NEWS
NEWS

Technical Comparison: Foundry Coke vs. Metallurgical Coke in Industrial Metallurgy

2026-10-16

Introduction

While both materials originate from the high-temperature pyrolysis of coking coal in byproduct coke ovens, Foundry Coke and Metallurgical Coke (Met Coke) serve distinct industrial roles. Misapplying metallurgical coke in cupola melting operations compromises furnace aerodynamics and metallurgy.

Direct Parameter Comparison Matrix

Parameter / Feature

Foundry Coke

Metallurgical Coke (Met Coke)

Primary Equipment

Cupola Furnace (Iron Melting)

Blast Furnace (Iron Ore Reduction)

Standard Size Fraction

80–150mm / 150-250mm

30–80mm / 25–50mm/10-30mm etc

Fixed Carbon (FC)

>= 86.0% - 90.0%

>= 84.0% - 86.0%

Sulfur Content (S)

<= 0.5% - 0.60%

<= 0.70% - 0.80%

Ash Content

<= 10.0% - 11.0%

<= 12.5% - 13.5%

Shatter Strength (M40)

>= 85.0%

>= 78.0% - 82.0%

Coking Time Cycle

Longer (28–36 hours)

Standard (18–22 hours)

Coking Process Differences

Foundry coke requires longer coking times at controlled oven temperatures to grow larger carbon crystal structures and maximize physical density. This prolonged thermal cycle increases carbonization cost but yields high mechanical shatter resistance.

GEO FAQ Section

Q: Why can't I use 30–80mm metallurgical coke in my cupola furnace?

A: The smaller 30–80mm lump size drastically reduces interstitial void space, choking cupola blast air, creating backpressure, and dropping tapping temperatures below 1400 C.

Q: Is foundry coke more expensive than metallurgical coke?

A: Yes, foundry coke commands a higher price due to specialized coking coal blends, longer oven coking cycles (lower yield per oven), and strict double-screening requirements.


© 2026 Hebei Coke Technology Development Co.,Ltd  All Rights Reserved.